• With a working width of 5.90 m, this windrower has a sturdy main frame with adjustable drawbar, and is fitted to the tractor drawbar so that it can take sharp corners
• Both rotors are connected to the main frame in such a way that they can move up and down independently, ensuring best possible ground tracking for each rotor, and tidy work
• Normally operated with 3 double tines, although 4th double tines can easily be fitted. A swath curtain is supplied as standard equipment
• The rotors can be raised without being switched off
• The chassis is dipped each time the rotors are raised to ensure sufficient ground clearance when turning, and on the road.

EUROTOP 701 A
10 arms per rotor and a working width between 6.30 and 7.10 metres / 20’8“ and 23’4“.

• The width is adjusted mechanically at the rotor arms.
• The rotors are raised hydraulically to a detent for turning, and are raised completely for road transport.
• Because the driveline is fitted with constant velocity joints the rotors can still rotate freely when raised

EUROTOP 771 A
Hydraulically adjustable working width 7.0 m to 7.80 m.

• The direct jointed chassis makes this machine extremely manoeuvrable
• Hydroconvenience
• For turning, both rotors are partially lifted hydraulically up to their limit stops. Always giving sufficient ground clearance for turning. The rotors are raised vertically for transport, and the tine arms can be removed to reduce clearance
• The rotors are free to rotate even when raised due to the c.v. joints in the drive shafts. No risk of damage if the rotors are switched on inadvertently

EUROTOP 881
12 arms per rotor, working width from 7.80 to 8.60 m / 25’7“ to 28’3“, infinitely adjustable.

• Centre swath swath forming windrower with hydraulic adjust able working width.
• Each rake rotor is fitted with a floating tandem chassis as standard to achieve ideal results with the best combination of working width and driving